Setup Guides
How to set up: Suction Cup
Learn how to set up the Ilios Lighting Suction Cup and the Rechargeable Table & Wall Mirrors.
- Make sure the area the suction cup will be adhered to and the suction cup are both clean and dry.
- The suction cup should be unlocked. To ensure it is unlocked, turn it counterclockwise from the base.
- Slightly moisten the bottom of the suction cup with water and press firmly onto the surface. Ensure to use only a little water, which may cause the suction cup to lose.
- Twist clockwise until you hear it lock into place.
- Apply pressure to the metal ball to confirm it is firmly locked before attaching the mirror.
- Attach the back of the mirror to the round metal ball and tilt it to the desired position.
To Remove
- To remove, first remove your mirror.
- Then twist counterclockwise until you feel it release.
- Pull the tab on the bottom of the suction cup while holding it in place with the other hand to prevent accidental falling.
- Store in a clean and dry place in between uses.
